Synergistic effect between 4-(2-pyridylazo) resorcin and chloride ion on the corrosion of cold rolled steel in 0.5 M sulfuric acid

The corrosion inhibition of 1-(2-pyridylazo)-2-naphthol (PAR) on the corrosion of cold rolled steel in 0.5 M sulfuric acid (H₂SO₄) was studied using weight loss method and potentiodynamic polarization method. Results obtained revealed that together with chloride ion, PAR is an effective corrosion inhibitor for steel corrosion in sulfuric acid. It was found that for steel corrosion inhibition in the presence of single PAR in sulfuric acid the Temkin adsorption isotherm may be used to explain the adsorption phenomenon. For the mixture of PAR and NaCl used as corrosion inhibitor, however, the Langmuir adsorption isotherm can be used to satisfactorily elucidate the adsorption of mixture of PAR and NaCl. Potentiodynamic polarization studies showed that single PAR mainly acts as a cathodic inhibitor for the corrosion of steel in 0.5 M sulfuric acid. The mixture of PAR and chloride ion, however, acts as a mixed type inhibitor that mainly inhibits cathodic reaction of the steel corrosion in sulfuric acid. By means of electrochemical polarization tests, a desorption potential at ca. −370 mV was observed for the adsorption of mixture of PAR and chloride ion, when potential reaches this value, adsorbed inhibitor molecule heavily departs from the steel surface. For the mixture of PAR and chloride ion, thermodynamic parameters such as adsorption heat, adsorption entropy and adsorption free energy were obtained from experimental data of the temperature studies of the inhibition process at four temperatures ranging from 30 to 45 °C, the kinetic data such as apparent activation energies and pre-exponential factors at different concentrations of the inhibitor were calculated, and the effect of the apparent activation energies and pre-exponential factors on the corrosion rates of cold rolled steel was discussed. The most suitable range of inhibitor concentration was discussed. The inhibitive action was satisfactorily explained by using both thermodynamic and kinetic models. Synergism between chloride ion and PAR was proposed. The results obtained from weight loss and potentiodynamic polarization were in good agreement.     

利用低能质子束产生高强度放射性束流

加拿大TRIUMF实验室利用¹¹C成功验证了一种产生高强度(～10⁸ions/s)放射性束流的方法. 该方法不同于普通在线同位素分离方法, 它利用了13MeV的低能强流质子束, 可以产生一系列核天体物理实验感兴趣的高强度放射性束流.     

Development of a RILIS ionisation scheme for gold at ISOLDE, CERN

At the ISOLDE on-line isotope separation facility, the resonance ionisation laser ion source (RILIS) can be used to ionise reaction products as they effuse from the target. The RILIS process of laser step-wise resonance ionisation of atoms in a hot metal cavity provides a highly element selective stage in the preparation of the radioactive ion beam. As a result, the ISOLDE mass separators can provide beams of a chosen isotope with greatly reduced isobaric contamination. With the addition of a new three-step ionisation scheme for gold, the RILIS is now capable of ionising 26 of the elements. The optimal scheme was determined during an extensive study of the atomic energy levels and auto-ionising states of gold, carried out by means of in-source resonance ionisation spectroscopy. Details of the ionisation scheme and a summary of the spectroscopy study are presented.     

Gating processes in Na-channel of biological membrane from the standpoint of superionic phase transition

The method of condensed matter physics is applied to reason out the problem of Na transport through a biological membrane. A similiarity of gating process in Na ion channel to the superionic phase transition is discussed. A possible microscopic mechanism is suggested.     

Recognition of ring pairs in the data analysis of Cherenkov detectors

We present a new algorithm for the identification of ring pairs in Cherenkov detectors. The approach combines linear regression methods for the construction of an appropriate reference quantity, methods from statistics for the evaluation of hypotheses and Monte Carlo simulation runs for the tuning of threshold levels.     

On the non-BoltzmannA-X emission in Na2 following laser excitation of theB state

A ¹Σ _u ⁺ -X ¹Σ _g ⁺ emission in Na₂ is observed following excitation ofB ¹π _u by various lines of an argon ion laser. The excitation energy ofB ¹π _u is collisionally transferred to the (2)¹Σ _g ⁺ which then radiatively populates theA ¹Σ _u ⁺ state. The Na vapour is contained in a stainless steel crossed heat pipe with Ar buffer gas and temperature around 600°C. For all laser lines except 4579 Å, the coarse features ofA-X emission are independent of the laser wavelength. However, at high resolution the finer differences between different laser line excitation are explained. Variousv′-v″ transitions in this emission are identified. Computer simulation is presented to help explain some features of this emission.     

Potentiometric studies on the complexation equilibria between some trivalent lanthanide metal ions and biologically active 2-hydroxy-1-naphthaldehyde thiosemicarbazone (HNATS)

Summary The chelation behaviour of some trivalent lanthanide and yttrium metal ion with biologically active 2-hydroxy-1-naphthaldehyde thiosemicarbazone (HNATS) has been investigated by potentiomotric measurements at 20±0.5°C in 75% (v/v) dioxane-water medium at various ionic strengths of sodium perchlorate. The method of Bjerrum and Calvin, as modified by Irving and Rossotti has been used to find out the values of (average number of ligand bound per metal ion) andpL (free ligand exponent). The formation constants of metal chelates have been computed on a PC-XT computer, using a program patterned after that of Sullivan et al. to give _n values using weighted least squares method. TheS _min values (S _min =²) have been calculated. The order of formation constants of chelates was found to be: La³⁺3+3+3+3+3+3+3+3+3+. The formation constants of the chelates formed have been correlated to size and ionization potentials of the metal ions.

---

Potentiometrische Untersuchungen der Komplexierungsgleichgewichte zwischen einigen trivalenten Metallionen und biologisch aktivem 2-Hydroxy-1-naphthaldehyd-thiosemicarbazon (HNATS)

Zusammenfassung Es wurde das Chelierungsverhalten einiger trivalenter Lanthanidenionen mit biologisch aktivem 2-Hydroxy-1-naphthaldehyd-thiosemicarbazon (HNATS) mittels potentiometrischer Messungen bei 20±0.5°C in 75% (v/v) Dioxan-Wasser bei verschiedener Ionenstärke an Natriumperchlorat untersucht. Die Methode nach Bjerrum und Calvin in der Modifikation nach Irving und Rossotti wurde zur Ermittlung der Werte (mittlere Anzahl an Liganden pro Metallion) undpL (Exponent an freiem Liganden) verwendet. Die Komplexbildungskonstanten wurden in Anlehnung an Sullivan et al. an einem PC-XT Computer errechnet. DieS _min-Werte (S _min=²) wurden ebenfalls bestimmt. Die Reihung der Chelatbildungskonstanten war: La³⁺3+3+3+3+3+3+3+3+3+. Die Bildungskonstanten sind mit der Größe und dem Ionisierungspotential der Metallionen zu korrelieren.

     

Formation of Amorphous AgI Aggregates Dominating Fast Ion Conductivity in AgI-based Glasses

Precise calorimetry was performed for (AgI)_x(AgPO₃)_1–x and (AgI)_x(Ag₂PO_3.5)_1–x glasses with very high AgI compositions (x0.75). The glasses showed -glass transitions due to the freezing-in of the rearrangement of conductive Ag⁺ ions. Magnitude of the associated heat-capacity jump increased with increasing the AgI composition in the respective glass systems, and was larger in the former system than in the latter when compared at the same AgI composition. All the results were well explained by the amorphous AgI aggregate model for the AgI-based fast ion conducting glasses, indicating the appropriateness of the model for the structure of the glasses with high AgI compositions. The formation of the hypothetical bulk amorphous AgI was also indicated in the glasses at the highest limit of AgI composition.This revised version was published online in November 2005 with corrections to the Cover Date.     

在Ni系ABO3和A2BO4型复合氧化物催化剂上NO吸附性能的研究

合成了具有钙钛石和类钙钛石结构的复合氧化物ＬａＮｉＯ３，Ｌａ０．１Ｓｒ０．９ＮｉＯ３，Ｌａ２ＮｉＯ４和ＬａＳｒＮｉＯ４。考察了它们对ＮＯ的吸附和ＮＯ直接分解反应的催化性能，结合比表面测定，化学分析，ＸＲＤ和ＮＯ－ＴＰＤ对催化剂的表征结果，探讨了该系列复合氧化物对ＮＯ的吸附规律。